Under the goal of global carbon neutrality, energy storage has become a crucial link. Whether it is the well-known lithium battery energy storage or a new energy storage method such as all-vanadium redox flow battery energy storage, it is on the power generation side and the grid side. The power side will be widely used, and the demand space is broad.
1. A variety of energy storage has entered a period of rapid development
Under the global carbon neutrality goal, clean energy will gradually replace fossil energy, wind power and photovoltaic power generation will become the absolute main force of clean energy, and the installed capacity will continue to increase. With the increase in the proportion of new energy power generation, the power balance mode of the entire power system also needs to be restructured.
2. Five types of energy storage are developing rapidly
Starting from 2020, the scale of new global energy storage has maintained a compound growth rate of more than 60% for five consecutive years, and the high growth rate is expected to continue until 2025.
Especially from 2022 to 2023, the installed capacity of energy storage will maintain an annual growth rate of doubling. In particular, the growth rate of household energy storage in Europe and the United States doubled last year, and the annualized growth rate will be 50%-100% in the next three years.
3. Li-ion battery energy storage
3.1 Lithium-ion battery energy storage introduction
Lithium-ion batteries are composed of a positive electrode, a negative electrode, a separator, and an electrolyte. At present, the positive electrode of mainstream products usually uses nickel-manganese-cobalt ternary materials or lithium iron phosphate, and the negative electrode is mostly carbon materials such as graphite.
Lithium-ion batteries have the advantages of high energy density, no memory effect, fast charging and discharging, and fast response. They are widely used in new energy generation side distribution and storage projects such as wind power photovoltaics and user side energy storage projects.
3.2 Lithium-ion battery energy storage demand continues to explode
In the new power system, energy storage will become a crucial link, and it is a necessary guarantee for the consumption of new energy and the security of the power grid. It will be widely used on the power generation side, the power grid side, and the power consumption side, and the demand space is broad.
At the same time, energy storage worldwide will rapidly increase the energy storage allocation rate driven by economic considerations and incentive policies. In 2022, countries and regions such as the United States, Europe, and Australia will all experience explosive growth.
According to the data, China’s energy storage lithium battery shipments will reach 130GWh in 2022, a year-on-year growth rate of 170%. Judging from the proportion of newly installed technologies in 2022, lithium-ion battery energy storage technology accounts for 94.2%, still in an absolute dominant position.
4. Pumped water storage
4.1 Introduction to pumped water storage
Pumped storage is a stable and reliable energy storage method widely used in the world. A pumped storage power station generally consists of an upper reservoir, a lower reservoir and a reversible pump-turbine.
During the low peak period of electricity consumption, the reversible water pump turbine is used as a water pump, using low-value electric energy to pump water from the lower reservoir to the upper reservoir, as the potential energy storage of water; The reservoir is opened to release water, and the potential energy of the water is converted into high-value electric energy.
4.2 Features of pumped water storage
Pumped storage has the advantages of superior technology, low cost, long life, large capacity, and high efficiency. Since the operation mode of the pumped storage power station is to convert energy between electric energy and water potential energy, its energy storage capacity mainly depends on the height difference and reservoir capacity of the upper and lower reservoirs.
And the loss caused by water evaporation and leakage is almost negligible , the energy storage cycle of pumped storage can be extended indefinitely, which can adapt to various energy storage cycle requirements, and the system cycle efficiency can reach 70%-80%.
At the same time, the dam body of the pumped storage power station after construction can be used for about 100 years, and the expected service life of electrical equipment is about 40-60 years.
5. Compressed air energy storage
5.1 Introduction of Compressed Air Energy Storage System
Compressed air energy storage is an energy storage technology based on the development of gas turbines, which stores energy in the form of compressed air.
During the energy storage period, the compressed air energy storage system uses wind/photovoltaic or low-valley electric energy to drive the compressor to convert the electric energy into air pressure energy, and then the high-pressure air is sealed and stored in abandoned mines, caves, abandoned oil wells or man-made gas storage tanks.
During the energy release period, the high-pressure air is released to drive the expander, and the stored air pressure energy is converted into mechanical energy or electrical energy again.
5.2 Development prospect of compressed air energy storage
The improvement of system efficiency and the reduction of cost are the basis for the commercial development of compressed air energy storage. At present, judging from the projects that have been completed and under construction, the system efficiency of MW level can reach 52.1%, the system efficiency of 10 MW level can reach 60.2%, and the design efficiency of system above 100 MW level can reach 70%.
The efficiency of the air energy storage system can approach 75%. After the system scale increases, the unit investment cost also continues to decline. Every time the system scale increases by an order of magnitude, the unit cost can decrease by about 30%.
6. Sodium ion energy storage
6.1 Introduction of Sodium Ion Energy Storage
Lithium, sodium, and potassium belong to the alkali metal elements of group IA of the periodic table of elements, and have similar physical and chemical properties. In theory, they can all be used as metal ion carriers for secondary batteries.
The working principle of sodium-ion battery is similar to that of lithium-ion battery. Similar to other secondary batteries, sodium-ion battery also follows the working principle of deintercalation. During charging, sodium ions are extracted from the positive electrode and inserted into the negative electrode.
More, the higher the charge capacity; the process is reversed during discharge, the more sodium ions returned to the positive electrode, the higher the discharge capacity.
6.2 Prospect of Sodium Ion Energy Storage Market
The cost advantage of sodium-ion batteries is obvious, especially for copper-based sodium-ion batteries. The main elements of the positive electrode material Na, Cu, Fe and Mn are cheap and widely sourced bulk elements. Compared with lithium-ion batteries Li, Ni, Co and other elements cost The advantages are obvious;
In addition, the performance of sodium-ion batteries is excellent, and according to the latest research progress of sodium-ion batteries, it has shown good performance in these aspects. After large-scale application, the cost is expected to be lower than that of iron-lithium batteries, and it can be widely used in large-scale electrochemical energy storage, low-speed electric vehicles and other fields, and is expected to form a complementary and effective alternative to lithium-ion batteries.
7. Lead-carbon battery energy storage
7.1 Introduction of Lead Carbon Battery Energy Storage
Lead-carbon battery is a capacitive lead-acid battery, which is a technology evolved from traditional lead-acid batteries. The positive electrode active material of ordinary lead-acid batteries is lead oxide (PbO2), and the negative electrode active material is lead (Pb).
If all the negative electrode active materials Pb are replaced with activated carbon, the ordinary lead-acid battery becomes a hybrid capacitor; In the negative electrode active material Pb, the ordinary lead-acid battery becomes a lead-carbon battery.
7.2 Energy storage characteristics of lead-carbon batteries
In terms of performance, lead-carbon batteries have the characteristics of both lead-acid batteries and capacitors, which not only take advantage of the advantages of supercapacitor instantaneous large-capacity charging, but also give play to the specific energy advantages of lead-acid batteries, and have very good charge and discharge performance.
The addition of carbon prevents the sulfation of the negative electrode, improves a factor of battery failure in the past, and prolongs the battery life.

can a hybrid inverter work without a battery? Yes, it can operate in a grid-connected setup to supply power directly from solar energy, but without storage, it cannot provide backup power or store excess energy, making a battery a valuable upgrade for better efficiency and reliability.

Lithium batteries do not emit harmful radiation. They operate through safe chemical processes, making them reliable and widely used for modern energy storage systems

Rechargeable batteries vs regular batteries differ in efficiency, lifespan, and application. Rechargeable batteries support repeated use and continuous energy storage, making them ideal for long-term and high-demand systems, while regular batteries are limited to single-use, short-term applications.





+86 – 18925002618




