The battery liquid cooling system has high heat dissipation efficiency and small temperature difference between battery clusters, which can improve battery life and full life cycle economy. With the development of liquid cooling technology for on-board batteries, it is estimated that by 2025, the global energy storage temperature control market will reach 9.4 billion RMB.
This article starts from the liquid cooling system and introduces the characteristics, technology, market trends and other related knowledge of the battery liquid cooling system.
What is a liquid cooling system?
Liquid cooling refers to the method of cooling by liquid contact with a heat source. It is a kind of thermal management scheme of battery energy storage system. There are four kinds of thermal management schemes applied in energy storage system: air cooling, liquid cooling, heat pipe cooling and phase change cooling.
At present, only air cooling and liquid cooling have entered large-scale applications, and heat pipe cooling and phase change cooling are still in the laboratory stage.
Composition and characteristics of battery liquid cooling system
The basic components of the battery liquid cooling system include: liquid cooling plate, liquid cooling unit (heater optional), liquid cooling pipeline (including temperature sensor, valve), high and low voltage wiring harness; cooling liquid (ethylene glycol aqueous solution), etc.
Battery liquid cooling system is safe, efficient and flexible.
The role of battery liquid cooling system
Temperature has an impact on the performance of the electrochemical energy storage system, such as capacity, safety, and life, so thermal management of the energy storage system is required. The impact of temperature on the energy storage system is reflected in two aspects:
- Temperature has an impact on the performance of a single cell, too high or too low temperature will affect the normal use of the cell;
- Temperature has an impact on the performance of the battery system. The temperature difference between multiple cells will affect the consistency of the system. The consistency problem will affect the safety, efficiency and life of the system.
What are the types of battery liquid cooling systems?
According to the different contact heat exchange methods between the cooling liquid and the server, the battery liquid cooling system can be divided into two types: direct contact and indirect contact. The most common indirect contact battery liquid cooling technology is cold plate liquid cooling, and the immersion battery liquid cooling and heat management technology is the most common direct contact technology.
Cold plate liquid cooling system
Cold plate liquid cooling belongs to indirect liquid cooling, that is, the heating element and the cooling medium are not in direct contact. The cold plate liquid cooling dissipates heat through direct contact with the cold plate filled with liquid, or the heat is conducted to the cold plate by the heat conduction component, and then the heat is taken away through the liquid circulation inside the cold plate.
The energy storage liquid cooling system mainly includes liquid cooling plate, liquid cooling host, pipelines, joints, evaporator, etc. The liquid-cooled host uses the power of the compressor to open up the refrigerant circulation loop. The refrigerant is throttled and depressurized by the electronic expansion valve, and enters the liquid-cooled plate to contact the battery cells for heat exchange, thereby realizing the cooling of the battery pack.
Immersion liquid cooling system
Immersion liquid cooling refers to the direct immersion of heating electronic components such as CPU, motherboard, memory stick, hard disk, etc. in an insulating and chemically inert cooling liquid (electronic fluorinated liquid), and the cooling liquid generated by the electronic components through the circulating cooling liquid Heat away.
The full immersion liquid cooling system has stronger temperature difference control capability and higher safety.
Different from the traditional liquid cooling scheme, in the fully immersed liquid cooling system, the battery system is immersed in the cooling insulating liquid as a whole, and the heat dissipation is realized through liquid circulation. Since the immersion liquid is in full contact with the battery cell, the temperature difference level of the battery cell can be better controlled.
In addition, when non-oil coolant is used, the liquid itself has the ability to extinguish fire, which has the effect of integrating temperature control and fire protection.
According to the different coolants selected, the fully submerged liquid-cooled energy storage system can be divided into three main types: water-based, oil-based, and fluorine-based.
Comparison of two battery liquid cooling system technologies
Investment
The cold plate battery liquid cooling system has many specifications and high customization cost. The system has a large number of quick connectors and valves, and the cost is high; while the immersion liquid cooling system consumes a large amount of coolant, and a special sealed pressure vessel or horizontal liquid cooling box, Cost is in the middle.
Energy saving
The cold plate battery liquid cooling system has a medium energy saving performance, with a PUE of 1.1~1.3. At the same time, the immersion liquid cooling system has excellent energy saving performance, with a PUE of 1.05~1.1.
Maintainability
The cold plate battery liquid cooling system has excellent maintainability (the coolant does not touch the circuit board), and the pipeline supports horizontal plugging; however, the maintainability of the submerged liquid cooling system is poor and does not support online maintenance.
Security
The cooling liquid of the cold plate battery liquid cooling system is mostly ethylene glycol aqueous solution, leakage can conduct electricity and corrode, and there is a risk of blockage of the cold plate flow channel.
In terms of chemistry, the cooling liquid of the immersion liquid cooling system is insulated and can operate safely; In terms of temperature, the cooling liquid has a strong heat dissipation ability, which can ensure that the temperature difference of the device is small, and it is not easy to age at high temperature.
Space utilization
The space utilization rate of the cold plate battery liquid cooling system is high, while the space utilization rate of the immersion liquid cooling system is moderate.
Market status of battery liquid cooling system
The battery liquid cooling system solution has gradually developed into an increment and has become the mainstream solution in the energy storage scenario.
From the perspective of the supply side, the battery liquid cooling system solution has high technical maturity, good cooling effect, and positive impact on system performance.
From the demand side, the development direction of the energy system with larger capacity and more scenarios has higher and higher requirements for thermal management, and the performance of the liquid cooling solution matches it better.
From the perspective of the competitive landscape, the suppliers of Zhuneng liquid cooling temperature control solutions mainly come from data center temperature control, industrial temperature control and automobile temperature control manufacturers.
The key to competition lies in the ability to design non-standard products. Because different energy storage integrators have different product designs, liquid cooling temperature control needs to be jointly developed with battery pack layout, liquid cooling pipeline design, and integrated with the battery.
Market prospect of battery liquid cooling system
At present, water-cooled mainframes and liquid-cooled panels are still customized products with high unit prices. It is expected that they will gradually develop in the direction of standard products in the future.
According to estimates, the value of China’s energy storage temperature control industry will be about 2.4 billion RMB (including exports) in 2021, and it is expected to reach nearly 16.5 billion RMB in 2025. Among them, the market of battery liquid cooling is expected to reach about 45% in 2025. In 2025, the global energy storage temperature control market is expected to reach 9.4 billion RMB. You refer top 10 energy storage liquid cooling host manufacturers in the world to know more.
In addition, it is estimated that by 2025, the global energy storage temperature control market will reach 9.4 billion RMB. According to forecasts, the global energy storage temperature control market size in 2023-2025 will be 3.7/6.1/9.4 billion RMB, +126%/+65%/+54% year-on-year.
The following three market outlook assumptions are available for reference:
- Hypothesis 1: The global energy storage market is growing rapidly. It is estimated that the newly installed capacity of global large-scale storage will be 91/145/218GWh in 2023-2025, respectively, +106%/+60%/+50% year-on-year;
- Hypothesis 2: As the owner’s requirements for the cycle life of the system increase, it is expected that the proportion of liquid cooling will gradually increase. In September 2022, CNNC Huineng released an announcement on the centralized procurement of new energy storage systems from 2022 to 2023, including 4.5GWh of lithium battery energy storage, of which 40% are battery liquid cooling systems. It is estimated that the proportion of liquid cooling in 2023-2025 will be 40%/50%/60% respectively;
- Hypothesis 3: With the emergence of scale effect, it is expected that the unit value of air cooling and liquid cooling will decrease respectively, and the value of air cooling system in 2023-2025 is expected to be 0.27/0.26/0.24 billion RMB/GWh; The value of the cooling system is 0.62/0.59/0.56 billion RMB/GWh respectively.
Summary
To sum up, in the thermal management scheme for energy storage system applications, battery liquid cooling system technology has gradually developed into a mainstream application technology in incremental energy storage scenarios due to its safety, efficiency, and flexibility. At the same time, the full immersion liquid cooling system has begun to show its prominence in recent years, and it may become a major trend in the future.

can a hybrid inverter work without a battery? Yes, it can operate in a grid-connected setup to supply power directly from solar energy, but without storage, it cannot provide backup power or store excess energy, making a battery a valuable upgrade for better efficiency and reliability.

Lithium batteries do not emit harmful radiation. They operate through safe chemical processes, making them reliable and widely used for modern energy storage systems

Rechargeable batteries vs regular batteries differ in efficiency, lifespan, and application. Rechargeable batteries support repeated use and continuous energy storage, making them ideal for long-term and high-demand systems, while regular batteries are limited to single-use, short-term applications.




+86 – 18925002618




