energy storage system

Introduction to battery cells for energy storage systems

Introduction to battery cells for energy storage systems
To achieve energy storage parity, the energy storage industry must move towards large-scale and healthy development, and solve difficulties in business models, safety and stability, levelization, and cost of electricity.
Table of Contents
    Add a header to begin generating the table of contents

    From a technical perspective, this article compares energy storage cells and power cells around safety and cost reduction, and finds that the evolutionary path of energy storage products is mainly reflected in large capacity, long life, high efficiency, high safety, high integration, and intelligence. 

    YouTube_play_button_icon_(2013–2017)

    1. The battery management systems of energy storage cells and power cells are different

    • Hardware architecture: The energy storage system is relatively large in scale, and the hardware basically adopts a two-layer or three-layer architecture. The power system generally adopts a one-layer architecture or a two-layer architecture.
    • BMS management: The power battery system is at a high speed and has higher requirements for the battery’s power response speed and power characteristics, SOC estimation accuracy, and the number of state parameter calculations. Related adjustment functions also need to be implemented through the BMS.

    In the energy storage system, the energy storage lithium battery only interacts with the energy storage converter at high voltage. The converter takes power from the AC grid and charges the battery pack; or the battery pack supplies power to the converter, and the electric energy passes through the converter.

    The converter converts it into AC and sends it to the AC power grid. The requirements for charge and discharge characteristics are relatively high.

    • Cost: Power lithium batteries face competition with traditional fuel power sources, while energy storage lithium batteries need to face cost competition with traditional peak and frequency modulation technologies. In addition, the scale of energy storage power stations is basically above the megawatt level or even hundreds of megawatts. Therefore, the cost of energy storage lithium batteries is lower than that of power lithium batteries, and the safety requirements are also higher.
    • Electrical architecture: The biggest pain point of electric vehicles is battery life. There are two solutions, one is fast charging and the other is battery replacement. The electrical voltage of automobiles has also increased from 400V to 800V, and other power systems such as two-wheeled vehicles are mostly 48V/60V/72V systems. Energy storage battery systems are also changing from low-voltage systems to high-voltage systems, with 1000V/1500V being the mainstream.
    • Communication method: Power battery systems generally use CAN communication. Whether it is a new energy vehicle or a two-wheeled vehicle, internal communication is implemented based on components. The energy storage system uses the CAN method internally, and the high-voltage part gradually favors the daisy chain method.

    The external communication method generally uses the TCP/IP protocol.Energy storage BMS is different from vehicle BMS. Vehicle BMS has higher requirements for adapting to the environment.

    The energy storage system is more complex and larger, with deeper charging and discharging depth and longer life cycle. The energy storage BMS needs to deal with a more complex energy management system.

    2. Different application scenarios

    Power lithium batteries are mainly used in electric vehicles, electric bicycles, electric motorcycles and other electric equipment; they are also used in handheld devices such as electric tools and garden tools;

    They are also used in power transmission substations to provide closing current for power units; power batteries have a high energy density, volume density, charge and discharge rate, battery safety and other aspects have higher requirements, and the cost is also higher.

    Energy storage lithium batteries are used to store and release electrical energy. They are mainly used for small outdoor energy storage, communication base stations, industrial and commercial energy storage, and large base station energy storage.

    Large base station energy storage is mainly used for peak shaving and valley filling with batteries, and power grid frequency modulation. , hydropower, wind power and photovoltaic rectification, etc.

    Among which peak shaving and valley filling are the main methods to earn the power price difference. At present, small energy storage equipment is developing rapidly.

    Small energy storage includes emergency backup power supply in base stations, digital products, power products, medical and security, and household UPS energy storage power supply, etc.

    Energy storage lithium batteries have higher requirements for service life

    3. Performance and design are different

    Power lithium batteries focus more on charging and discharging power. They require fast charging rates, high output power, and resistance to vibration. They especially emphasize high safety and high energy density to achieve long-lasting endurance, as well as lightweight requirements in terms of weight and volume. 

    Energy storage lithium battery equipment emphasizes battery capacity, especially operational stability and battery life cycle . Consider more about battery module consistency and battery materials. Expansion rate and energy density, electrode material performance uniformity, etc., in order to pursue the long life and low cost of the overall energy storage device.

    Power batteries have higher performance requirements than ordinary energy storage batteries. For example, the energy density should be as high as possible, the charging speed of the battery should be fast, and the discharge current should be large. However, the requirements of ordinary energy storage batteries are not so high.

    According to standards, power batteries If the capacity is less than 80%, it can no longer be used in new energy vehicles, but with slight modifications, it can also be used in energy storage systems. The charging and discharging current of power batteries is larger, and the requirements for internal resistance are also more stringent.

    Charging and discharging voltage: Different types of lithium batteries have different charging and discharging voltage requirements. Before charging and using, you need to pay attention to whether the voltage matches to prevent the battery from overcharging or overdischarging.

    The scenarios in which power batteries are used are more severe and the working conditions will be more complex. The design of power batteries requires the support of a complete charge and discharge power map and SOP strategy.

    4. Different types of batteries used

    For reasons of safety and economy, energy storage lithium battery energy storage power stations often use lithium iron phosphate batteries when choosing lithium battery packs. There are also other batteries, such as lithium cobalt oxide batteries. The current mainstream battery types for power lithium battery electric vehicles are LFP batteries and NCM battery.

    Power-type batteries mainly improve cooling performance by reducing the internal resistance of the battery, and significantly reduce losses during power input and output.

    At the same time, the charge and discharge rate is 10 times higher than that of traditional energy batteries, which can provide sufficient energy for the system at any time.

    High-voltage home energy storage systems are less expensive than low-voltage energy storage systems

    5. Different charging and discharging rates

    Due to different application scenarios, battery performance requirements are also different. First of all, as a mobile power source, power lithium batteries have high requirements for volume (and mass) energy density as much as possible under the premise of safety, in order to achieve more lasting battery life.

    At the same time, users also hope that electric vehicles can charge safely and quickly, so power lithium batteries have high requirements for energy density and power density. Just because of safety considerations, energy batteries with a charge and discharge capacity of about 1C are currently commonly used.

    Most energy storage devices do not need to be moved, so energy storage lithium batteries have no direct requirements for energy density. As for power density, different energy storage scenarios have different requirements.

    It is used in power peak shaving, off-grid photovoltaic energy storage or user-side peak-valley price difference energy storage scenarios. Generally, the energy storage battery needs to be continuously charged or discharged for more than two hours, so it is suitable to use a capacity type with a charge-discharge rate of ≤0.5C. Battery.

    For power frequency regulation or energy storage scenarios that smooth renewable energy fluctuations, energy storage batteries need to be charged and discharged quickly in seconds to minutes, so they are suitable for ≥2C power battery applications;

    In some cases, frequency regulation and power regulation are required at the same time. For peak application scenarios, energy-type batteries will be more suitable. Of course, power-type and capacity-type batteries can also be used together in this scenario.

    Power lithium batteries are mainly used in electric vehicles

    6. Different cycle life

    Lithium-ion battery energy storage have higher requirements for service life. The lifespan of new energy vehicles is generally 5-8 years, while the lifespan of energy storage projects is generally expected to be greater than 10 years. The cycle life of power lithium batteries is 1000-2000 times, while the cycle life of energy storage lithium batteries is generally required to be greater than 3500 times.

    Charging and discharging failure characteristics are different: energy storage lithium batteries require high capacity and long life, and are required to be able to store power for a long time, while power lithium batteries require high discharge rates and cycle life to meet high-speed and high-power usage requirements.

    7. Different energy densities

    Compared with power batteries, energy storage batteries have lower energy density requirements. As long as they are mainly capacity batteries, they do not require high output power. But higher reliability and lifespan are required. The energy density requirements of power lithium batteries are relatively high to meet the needs of high-speed and high-power use.

    The energy storage system is relatively large in scale

    Related posts

    logo+86 – 18925002618
    [email protected]
    Guangpu West Road, Huangpu, Guangzhou, Guangdong, China

    Product

    Video Gallery

    Huntkey automated battery storage workshop process
    Huntkey Grevault participated in Germany ESE exihition with 5KW mobile power bank
    Contact Form Demo
    Scroll to Top