The battery cell is the smallest unit that constitutes commercial energy storage systems, and changes in their performance directly affect the operating status of the power station.
Thus, preventing battery heating is crucial for ensuring the longevity and safety of energy storage systems. This article will introduce what battery heating is and how to prevent it.
What is battery heating?
Battery heating refers to the phenomenon that the temperature of a rechargeable battery rises abnormally during use.
Generally, the harm caused by the heat generated by a single battery is limited. However, in the application scenario of energy storage power stations, the number of single cells is large and closely arranged.
When battery heating occurs, the heat it generates may be conducted to surrounding cells, causing thermal runaway to spread and the harm caused will be magnified.
What are the reasons for battery heating?
Under normal circumstances, the cell monomer should have strict parameter consistency and stability.
During the normal charging and discharging process, the heat accumulation rate should not exceed the limit. The heat can be conducted through the medium and shell and the temperature should be limited to a certain range , which can maintain safety and stability.
However, there are inevitable differences among the battery cells. The state differences between the battery cells mainly include the initial differences of the cells and the parameter differences generated during use.
Like different battery energy storage system designs, there are many kinds of differences in the design, manufacturing, storage and use of the battery cells. Uncontrollable factors will affect the consistency of the battery core.
Differences in cell parameters and performance may lead to excessive local heat accumulation, resulting in battery heating.
In addition, arc, lightning, overload, short circuit and other faults or abnormal operating conditions may also cause a large amount of heat accumulation. When a certain temperature is reached, the oxidant on the positive electrode can react chemically with the electrolyte. Further accelerated accumulation of heat will cause thermal runaway, followed by combustion and other accidents.
At the same time, due to the chemical combustion properties of batteries, it is difficult to use conventional fire extinguishers, water sprays and other means to suppress the spread of fire.
How do I know if battery is heating?
You can detect the characteristic parameters of battery heating below:
● Temperature
Many battery warning devices and lithium ion BMS are equipped with temperature sensing devices to monitor battery temperature. Once the temperature exceeds a preset threshold, an alarm signal will be issued or corresponding actions will be taken.
However, this method of monitoring surface temperature has a hysteresis. Because the heat generated internally takes a certain amount of time to be conducted to the surface, and there is also heat dissipation during the conduction process (heat exchange between the battery and the environment).
At present, some experts have proposed early warning methods based on internal temperature.
● Characteristic gas
When the battery is in the early stage of battery heating, these characteristic gases will appear from scratch and gradually increase in concentration, that is, there will be an obvious change characteristic. Therefore, using corresponding gas sensors to provide early warning for battery thermal runaway is also an important way.
● Characteristic sound
Most lithium-ion batteries used for energy storage are prismatic hard-shell batteries, and there will be a safety valve on the top of the battery shell. Its main function is to release the pressure inside the battery in a timely manner to prevent the pressure from continuing to increase and cause an explosion.
There will be a very obvious sound when the safety valve is opened, and there is a certain frequency of the sound when the safety valve is opened. Therefore, this characteristic sound can also be used as a parameter for battery heating warning.
● Visible smoke
Lithium-ion batteries all use organic electrolytes with low boiling and flash points. When the battery safety valve is opened and the internal temperature of the battery is high enough, the electrolyte will be directly heated and vaporized in addition to participating in side reactions of the positive and negative electrodes and other materials. The vaporized electrolyte sprays out from the safety valve to form “white smoke (fog)”.
● Pressure
When the battery heats up and loses control, a series of side reactions will occur internally. Some side reactions will generate gas, such as the decomposition of the SEI film to generate gas, the reaction of lithium dendrites and binders to generate gas, the decomposition of the electrolyte to generate gas, etc.
Before the battery safety valve opens, these gases will accumulate inside the battery case, causing the battery to bulge, and the pressure inside the battery will also change accordingly. Therefore, early warning of battery heating and thermal runaway can be achieved by monitoring the internal pressure of the battery. However, it should be noted that the pressure data before the safety valve is opened is valid.
How to prevent battery heating?
Energy storage container usually need to be equipped with a cooling system to ensure that the battery maintains an appropriate temperature during operation.
The working principle of the heat dissipation system is to transfer the heat of the battery to the surrounding environment through a heat transfer mechanism to prevent the battery from overheating, thus improving the performance and life of the battery. Here’s how a cooling system generally works:
1. Radiator: Energy storage battery containers usually include radiators or radiator components. These radiators are usually located around the battery modules or battery packs. The main task of a radiator is to increase the surface area so that heat can be dissipated more efficiently.
2. Thermal conductor: The thermal conductor is a material used to transfer the heat generated inside the battery to the radiator. Typically, aluminum or copper are commonly used thermal conductor materials because of their good thermal conductivity properties. These thermal conductor components are located between the battery module and the heat sink.
3. Fan or liquid cooling system: The cooling system usually includes a fan or liquid cooling system to increase the heat dissipation efficiency. Fans dissipate heat by blowing air, while liquid cooling systems use coolant circulation to absorb and transfer heat. These systems can adjust automatically or manually as needed to keep the battery’s temperature within a safe range.
4. Temperature monitoring and control: In order to ensure that the battery operates within the appropriate temperature range, energy storage systems are usually equipped with temperature monitoring and control systems.
These systems can monitor the temperature of the battery and adjust the operation of the cooling system as needed. If battery temperature rises to dangerous levels, the system can automatically take action, such as increasing fan speed or shutting down battery charging/discharging.
5. Thermal insulation: At the same time, the heat dissipation system also needs to consider thermal insulation to prevent excessive heat from escaping, especially in low-temperature environments. Thermal insulation reduces battery energy loss under extreme temperature conditions.
In short, the cooling system plays a key role in the energy storage battery container, helping to maintain the appropriate temperature of the battery to ensure its performance and life.
These systems typically vary depending on the application and battery technology, but their primary goal is to prevent the battery from overheating, thereby increasing the reliability and efficiency of the energy storage system.








+86 – 18925002618




